Oxygen Depletion Safety Monitor, O2Ne+™


The widespread use of N2, LN2, He or Ar in laboratories poses a potential asphyxiation hazard to personnel. If an inert gas leaks or builds up in a confined area it can deplete the O2 to dangerously low levels. The use of enriched O2 in laboratories poses both a fire risk and hyperoxia risk to personnel if it were to leak or build up in a confined area.

The O2NE+ and Safe-Ox+ from Analox Sensor Tecnhology are an affordable, low maintenance, long life solution to assist in mitigating the risk of using these gases in your laboratory.
  • Long life, low drift sensor lasts up to 7 years
  • Minimum calibration check required - only every 12 months (user maintainable)
  • Simple to read "OK", "Alarm" and "Fault" indication
  • Easy installation and maintenance can be conducted by the user
  • Additional (quick connect) alarm repeaters available if more than one entrance to the laboratory
  • Assists in compliance with Exposure Limit regulations such as EH40
  • Supplied with relays which can be used to trigger ventilation or building management systems etc
Specifications:
Range :0.1 to 25 % O2
Sensor Accuracy :+/- 0.75 % O2 (5.0 to 25.0 %)
Alarm intensity :85 dbA
Monitor display :4 digit LCD
Operating Temperature :0 to 40 °C
Monitor Dimensions :175 x 110 x 75 mm
Alarm Repeater Dimensions :72 x 170 x 45 mm
IP Rating :IP65 (IP43 alarm repeater)
Warranty :2 years electronics (1 year sensor)
The O2NE+™ is a simple to use, wall mounted oxygen depletion monitor which has 2 audible/visual alarms which will trigger at 19.5% and 18% O2 which means that lab personnel can take evasive action in the event of a gas leak.

Delivery Includes: Main O2 sensor unit with relay on 2nd alarm (18%) and 1 alarm repeater to be placed at the entrance, with mains power supply
Oxygen Depletion Safety Monitor, O2Ne+™ Heco-Catalogue




Oxygen Depletion Safety Monitor, O2Ne+™
TypeConnectorPKCat. No.Manuf. Prod. No.
O2Ne+™EU16.284 255AX1BK10X11Q1Y01
O2Ne+™UK16.284 256AX1BK10X55Q1Y01