Entries 1 to 120. Total of 120 entries found.
Display  Symbols:off Entries:10203050100 Columns:12
 Description 
 Acoustic insulation fleece for PM56 pack of 2 
 Anchor stirrer AR 3 stainless steel, Ø 150x10 wave, length 500mm 
 Angle connection/attached beak WA-ST 18 
 Bevel PLR 
BUDDE - joint grease 
 Buddemix 2 PFA, WNr. 1.4404, PFA coating incl. pre-treatment by sandblasting Layer thickness about 0.5 mm, coating all sides 
 BuddeMix 5 L 550mm, wave 12mm, stirr head Ø 150mm 
 BuddeMix 6 L 550mm, wave 12mm, stirr head Ø 170mm 
 BuddeMix 7 L 850mm, wave 14mm, stirr head Ø 210mm 
 BuddeMix 8 WNr. 1.4404, Ø 320mm x 20 x 850 mm 
 BuddeMix SW 4 Ø 300/44 mm x 14 x 750 mm for bunghole opening 2" 
 BuddeMix SWK 1 L 600mm, wave 10mm, stirr head Ø 180mm 
 Bush PLR 
Clamp holder SP 
 Clamping holder type SP without cross clamp 
 clamping screw 
Compressed air industrial stirrers BSR 64 with floor stand 
 Compressed air laboratory stirrer PLM 38/1180 
 Compressed air laboratory stirrers PLR 12 GA housing stainless steel, idle speed 850 rev/min., 200W, 94/9 EC (ATEX), Ex II 2G c 
Compressed air powered stirrers, PLR, accessories 
 Compressed air screw-on drum agitator AFR 64 160-V stainless steel 
 Compressed air stirrer PLR 10 TGA 
 Compressed air stirrer PLR 11 GA 
 Compressed air stirrer PLR 11 TGA 
 Compressed air stirrer PLR 12 TGA 
 Compressed air stirrer PLR 28 TGA 
 Compressed air stirrer PMR 13 GA Ex II 2G c T5 (ATEX) 
 Compresses air industry stirrer PM 64/30-A-V Atex with rotatable clamping device 
 Compresses air industry stirrer PM 64/65-A-V with rotatable clamping device 
 Connection coupling VK 12x10 
 Connection coupling VK 14x16 
Connection couplings 
 Cooling bag 
 Cross bosshead rotatable type KK-16 for support rods up to 16 mm 
 Cross clamp KR 260 11-19/18-36 mm 
Cylinder oil 
 Deep groove ball bearing 
 Deep groove ball bearing for bearing shield-entry PLR 
 Dissolver stirrer DS 10 Ø 200x20 wave, length 1000mm 
 Dissolver stirrer DS 11 Ø 250x20 wave, length 1000mm 
 Dissolver stirrer DS 2 stainless steel, Ø 40 x 10 x 350 mm 
 Double blade stirrer DR 1 Ø 60 x 8 wave x L= 500 mm from stainless steel 
 Double blade stirrer DR 2 with 2 stirr blades Ø 80mm, wave Ø 8mm length 500mm 
 Fins 1 set for PLR compressed air laboratory stirrer oil free, pack of 4 
 FKM spare seal 20x3 mm 
 FKM spare sealing 21x3 mm 
 FKM spare sealing 36x3 mm 
 FKM spare sealing 37x3 mm 
Flow Monitor 
 Food oil 500 ml according to FDA 
 Glass stirrer coupling flexible K15 
Glass temperature sensor double Pt 100, 100mm 
 Glass temperature sensor double Pt 100, 200mm 
 Glass temperature sensor double Pt 100, 300mm 
 Glass temperature sensor double Pt 100, 400mm 
 Glass temperature sensor double Pt 100, 500mm 
 Glass temperature sensor single Pt 100, 200mm 
 Glass temperature sensor single Pt 100, 300mm 
 Glass temperature sensor single PT 100, 500 mm 
Glass temperature sensor single Pt100, 100mm 
 Glass temperature sensor single Pt100, 400mm 
Heating bath liquid, BUDDE 
Laboratory safety shield, Polycarbonat® 
Magnetic stirrer bearing with ground joint 
 Manometer on metal plate leg length 1000 mm 
 Needle cage 
 ORBOT 32 Bed A 400 mg, Bed B 200 mg 
 Pharma- Food Stirrer PLM 38/260 
 Plate support PS 1 210x315x1000 mm, bar 14 mm Ø 
PLR compressed air laboratory stirrers up to 25 L for use in potentially explosive atmospheres, without/with tachometer 
PMC 120 compressed air container stirrers for Intermediate Bulk Containers (IBCs) up to 1500 L 
 Pressure air stirrer PM 64/160-V with round flange, housing from stainless steel, with valve, 640W 
 Pressure air stirrer PM 64/30-V with round flange, housing from stainless steel, with valve, 21 Nm, 6 bar, drive wave 14mm 
 Pressure air stirrer PM 64/65-V with round flange, housing from stainless steel 
 Propeller screw PR 3 Ø 140x10x550mm 
 Propeller screw PR 3 Ø 55x8x350mm 
 Propeller screw PR 4 Ø 140x10mm, length 850mm 
 Propeller stirrer dia. 50x10mm length 550mm 
 Propeller stirrer PR 11, Ø 150 mm bolt d= 14 mm, length 1000 mm 3 wings, Wst. 1.4305 
 Propeller stirrer PR 13, Ø 175 mm bolt d= 14 mm,length=1000 mm 
 Propeller stirrer PR 15, Ø 200 mm bolt d= 20 mm,length=1000 mm 
 Propeller stirrer PR 5 75x10mm shaft, length 450mm ***custome made*** 
 Propeller stirrer PR 5 75x10mm shaft, length 550mm 
 Propeller stirrer PSR 1 Ø 50x8 wave, length 350mm 
Quick action chuck SSF 
Rod and tubing cutter 
 Round sealing ring PLR 
Safety transport containers made of stainless steel 
Service unit WE-2018 
 Set of Lamellas for compressed air motor PM 56/65 pack of 4 
 Silencer pm56 U 3/8" 
 Simmer ring for PM 56 G 20x26x4 
 Simmer ring PLR 
 Sinter metal ring PLR 
 Sirr head MRK 12/40 200 bar, 2000 ml, with permanent magnetic coupling 
 Spacer ring PLR 
Speed regulation valve V 
Speed regulation valve V3 
Stands 
 Steaming ring PLR 
 Stirr head MRK 13/40 700 bar, 2000 ml, with permanent magnetic coupling 
 Stirr head MRK 16/90 200 bar, 10000 ml, with permanent magnetic coupling 
 Stirr head MRK 17/90 700 bar, 10000 ml, with permanent magnetic coupling 
 Stirrer heads with magnetic coupling and flange width 25 mm,torque 0.9 Nm,cap. up to 15 ltrs 
 Stirrer heads with magnetic coupling and flange width 40 mm,torque 0.6 Nm,cap. up to 10 ltrs 
 Stirrer heads with magnetic coupling and flange width 50 mm,torque 0.9 Nm,cap. up to 15 ltrs 
Stirrer heads with magnetic coupling and screw thr torque 0.2 Nm,cap. up to 1 ltr MRK 11/20 
Stirrer heads with magnetic coupling and screw thr torque 0.2 Nm,cap. up to 1 ltr MRK Mini 100-20 
Stirrer heads with magnetic coupling and screw thr torque 0.2 Nm,cap. up to 1 ltr MRK 10/20 
 Stirrer heads with magnetic coupling and screw thr torque 0.5 Nm,cap. up to 1.5 ltr MRK Mini 100-50 
 Stirrer heads with magnetic coupling and screw thr torque 0.6 Nm,cap. up to 5 ltr MRK 14/60 
 Stirrer heads with magnetic coupling and screw thr torque 0.6 Nm,cap. up to 5 ltr MRK 15/60 
 Stirrer shaft ***custom made product*** 
 Stirring head Ø 60mm for BuddeMix 1 ***custom made product*** 
 Stirring head Ø 80mm for BuddeMix 2 ***custom made product*** 
 Storrage shield outlet behind to PLR 3/4/11/12/13 
 Storrage shield outlet front to PLR 3/4/11/12/13 
 Tachometer for PLR 13T 
 Vonnection coupling VK 10x6 Mat.No. 1.4404 
 Vonnection coupling VK 7x6 Mat.No. 1.4404